MV Agusta F4 750, 1000, 312 1998-2009Kotflügel vorne

MV Agusta F4 750, 1000, 312 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009

Wählen Sie ein Design

GFK - Fiberglas
GFK - Farbiges Schwarz
GFK Racing
Carbon
Kevlar-Carbon

Code: MV-PB|G

Preis ohne MwSt.: 50,00 

Code: MV-PB|GB

Preis ohne MwSt.: 90,00 

Code: MV-PB|GR

Preis ohne MwSt.: 65,01 

Code: MV-PB|C

Preis ohne MwSt.: 250,00 

Code: MV-PB|KK

Preis ohne MwSt.: 260,01 

  • Unsere Kotflügeln sind in mehreren Varianten.
     
  • Standard aus Fiberglas (GFK) aus mehreren Schichten Matte und Gewebe gesättigten mit hochwertigen Harz => ausgezeichnete Steifigkeit und Flexibilität ausgeliefert. 
     
  • In gefährdeten Gebieten mit Kevlar-Carbon verstärkt.

Installation

  • Kotflügel verwenden Sie die Originalbefestigungspunkte.
  • Bei der Installation, sorgen für die richtige Bohren Montagelöcher und die Schrauben mit einem Gespür für den rechten Kotflügel Position festziehen.

Installationsanweisungen, Hinweisen, Tipps für die Installation finden Sie hier >>>

Technische Spezifikationen

  • Kotflügeln mit nur wenigen Ausnahmen sind für den ursprünglichen Reifengröße.

  • Unsere Schutzbleche sind aus Fiberglas (GFK) hergestellt, aus mehreren Schichten Matte und Stoff mit hochwertigen Harz => ausgezeichnete Steifigkeit und Flexibilität gesättigt.

  • In anfälligen Stellen mit Kevlar-Carbon-verstärkte.

  • UV-stabil weißen Gelcoat kann unter Wasser geschliffen werden, gesprüht Füllstoff und mit Farbe besprüht oder unter Wasser geschliffen und im Notfall gesprüht.

Materialien / Design

GFK - Fiberglas

Basic and cheapest version is GFK fiberglass. Thanks to the precision of employees in handmade production and the emphasis on the quality of these products, they have perfect flexibility, durability and low weight. Composition - UV stable white gelcoat (not paint), fiberglass mat and fiberglass cloth impregnated with resin. In the stressed and susceptible places to break the parts are reinforced by Kevlar-Carbon layers as needed, or Coremat for the seats. Parts are flexible and have a smooth surface. Are made for paint job.
Mehr Fotos >>>
Why GFK- fiberglass? For example those who want to put fairings on for the circuit at low cost. Or inexpensively replace a precious piece (broken) original.

GFK - Farbiges Schwarz

Composition - UV stable gelcoat - colored (black RAL 9005), fiberglass mat and fiberglass cloth impregnated with resin. In the stressed and susceptible places to break the parts are reinforced by Kevlar-Carbon or Coremat for the seats. Parts are flexible and have a smooth and polished surface. There is no need to paint!
Mehr Foto >>>

Why GRP - colored fiberglass? - Nice polished parts, for those who want to save for the paint job if they fit accessory in black. After hitting with for example Gravel, the part remains black of the damaged place.

GFK Racing

Lightweight version GRP. This design was developed on testing and requirements of the elite teams in the prestigious race series. With these products, we focus on the lowest weight, while maintaining maximum flexibility. They are lighter than conventional GRP parts. In the stressed and susceptible places to break the parts are reinforced by Kevlar-Carbon or Coremat for the seats. The material used fiberglass, Kevlar-Carbon, white or transparent gel and resin.
Why GFK - fiberglass Racing? - For anyone who wants to reduce the weight to the maximum. Weight comparable to carbon parts. Suitable for racing teams or individuals, which paint their racing fairings.

Carbon

 These products consist of a transparent gelcoat and carbon fabric and resin used here is different than GRP parts. The components are lightweight and stronger than GRP. Weight reduction compared to GRP is about 30-50%. The parts are polished to a high gloss, for the carbon fiber to stand out. Note: (Engine covers, frame covers, swing arm covers - first layer Carbon (black fabric) + additional layers of Kevlar-Carbon). 
Why Carbon design? - For fans of Carbon. Low weight and hardness. In this embodiment, we place extreme emphasis on the surface and visible layer so as to stand out preferably carbon cloth. Suitable for showbikes. Highly polished. Parts also don’t need any paint. At the frame, swing-arm, engine and other small covers using multiple layers of carbon and Kevlar-Carbon achieved extreme hardness of the product.

Kevlar-Carbon

 Para-aramid fiber whose properties are high abrasion resistance. These products consist of a transparent gelcoat, Kevlar fabric, which is carbon-laced (Kevlar-Carbon) against yellow-black color product. There is also used another kind of resin than fiberglass. In this embodiment, we place extreme emphasis on the surface and visible layer so as to stand out preferably carbon cloth. Suitable for showbike. Highly polished. Parts don’t need any paint.
This material is used on reinforcements in exposed places our products. 
Why Kevlar-Carbon finish? - For those who want to be different! The components are lightweight, stronger and least susceptible to abrasion from all versions.

Deine Fragen

Haben Sie in der Teilebeschreibung nicht gefunden, was Sie wissen müssen? Kontaktiere uns.

Abychom vám mohli web lépe přizpůsobit, uchováváme soubory cookies. Používáním webu s tím souhlasíte. Potřebuji více informací