UNI mask - flyscreen Streetfighter Version 1 - mit Halters

Wählen Sie ein Design

GFK - Fiberglas
Carbon

Code: NM-12|G

Original Preis : 151,00 

Preis ohne MwSt.: 72,07 

Code: NM-12|C

Preis ohne MwSt.: 604,00 

  • UNIVERSAL TEILE
  • UNI Street Fighter Maske mit Beamerhaltern
    Geeignete (Projektoren): (S-316HC) und (S-316HR)


    Dimensions:

    • Height  300mm
    • Wide 350mm
    • Wide of the mounting brackets 250mm
    • Diameter hole for headlamps 78mm 

>>>> warum Motoforza?

  • Hochwertiger bewährten Serie MotoGP, WSBK, IDM, IRC, TT
  • Perfekte Passform, Flexibilität, Haltbarkeit
  • Mehrere Schichten von Kevlar-Carbon-Verstärkungen für extra Haltbarkeit 
  • Glatte Oberfläche konforme Beschichtung, pin-Loch frei.
  • Unsere Teile sind viel leichter und viel billiger als ABS Originalteile

Materialien / Design

GFK - Fiberglas

Basic and cheapest version is GFK fiberglass. Thanks to the precision of employees in handmade production and the emphasis on the quality of these products, they have perfect flexibility, durability and low weight. Composition - UV stable white gelcoat (not paint), fiberglass mat and fiberglass cloth impregnated with resin. In the stressed and susceptible places to break the parts are reinforced by Kevlar-Carbon layers as needed, or Coremat for the seats. Parts are flexible and have a smooth surface. Are made for paint job.
Mehr Fotos >>>
Why GFK- fiberglass? For example those who want to put fairings on for the circuit at low cost. Or inexpensively replace a precious piece (broken) original.

Carbon

 These products consist of a transparent gelcoat and carbon fabric and resin used here is different than GRP parts. The components are lightweight and stronger than GRP. Weight reduction compared to GRP is about 30-50%. The parts are polished to a high gloss, for the carbon fiber to stand out. Note: (Engine covers, frame covers, swing arm covers - first layer Carbon (black fabric) + additional layers of Kevlar-Carbon). 
Why Carbon design? - For fans of Carbon. Low weight and hardness. In this embodiment, we place extreme emphasis on the surface and visible layer so as to stand out preferably carbon cloth. Suitable for showbikes. Highly polished. Parts also don’t need any paint. At the frame, swing-arm, engine and other small covers using multiple layers of carbon and Kevlar-Carbon achieved extreme hardness of the product.

Installation

In der Regel ist es am besten, Montagehalterungen aus Ihrer Machine & die gewünschte Position zu erstellen. 

Installationsanweisungen, Hinweisen, Tipps für die Installation finden Sie hier >>>

Technische Spezifikationen

Größe:

  • Höhe 300mm
  • Breit 350mm
  • Breite der Montagehalterungen 250mm
  • Durchmesser-Loch für Scheinwerfer 78mm

Deine Fragen

Haben Sie in der Teilebeschreibung nicht gefunden, was Sie wissen müssen? Kontaktiere uns.